Live specialists · Mon–Fri 9 AM–8 PM · Sat 12–5 PM (CST) Call or text 832-509-5009

Videos & manuals

Pergola roof installation.

Step-by-step videos and installation manuals for both systems. Most homeowners comfortable with basic tools can install either roof on an existing pergola.

Installing Hercules System

Installing Apollo System

Both systems

Before you start.

A little preparation makes the install faster and protects your warranty. Not sure your pergola is ready? Send us a few photos and we'll take a look.

Do it yourselfCommon tools, step-by-step video and manual.
Hire any contractorShare the video and manual — that's all they need.

Professional installation is also available in Houston and Dallas–Fort Worth.

Prepare the pergola

  • Slope: 1/4″ per 12″ for Hercules, 1″ per 24″ for Apollo
  • No slope? Lateral or doorstop shims can create one
  • Check rafter and purlin spacing for your system
  • Replace any rotted wood and refresh the stain first
See all pergola requirements →

Tools you'll need

  • Circular saw, table saw or commercial jigsaw
  • Fine-tooth carbide blade (8–12 TPI)
  • Electric drill with 1/4″ bit
  • Tape measure, rubber mallet, putty knife
  • Oscillating tool (optional)

Installation questions

Good to know.

Stuck on a step? Call, text or chat — we're happy to help during business hours.

Can I install it on my existing pergola?

Yes. Both systems are designed to install on an existing pergola, as long as it has the recommended slope and rafter/purlin spacing. Send us photos if you're unsure.

My pergola is flat. What do I do?

Apollo needs at least 1 inch of slope per 24 inches and Hercules at least 1/4 inch per 12 inches. On a flat pergola, lateral shims on the rafters or purlins, or doorstop shims on the purlins, can create the slope.

Can I cut the panels myself?

Yes. Use a circular saw, table saw or commercial jigsaw with a fine-tooth carbide blade (8–12 teeth per inch). Measure twice — custom-cut panels generally can't be returned.

What's different about installing Hercules?

Hercules uses interlocking standing-seam panels with no screws through the panels, and needs purlins spaced under 19 inches for its full 139 mph wind rating.

Do you offer professional installation?

Yes, in Greater Houston and Dallas–Fort Worth, including a site inspection. Call or text 832-509-5009 to check availability.

Questions before you order?

We'll help you get it right.

Send your measurements and a few photos — we'll confirm the right system, panel lengths and accessories.